High-quality 6-volt bulb set including voltage regulator and Y-cable, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
The set includes a 6V Leonelli voltage limiter, a single-pole 6 Volt P26s front light and a BA9s or E10 rear light with 6 V.
Thanks to the included transition cable, you don't have to cut up your original wiring harness or patch it up with solder terminals and other connectors. Simply connect the red cable lugs to the wiring harness and the black flat connector to the controller contact. To insulate the connection point, slide the heat-shrink tubing over the connection and shrink it together with a lighter or hot air gun.
The set includes the following fixed parts:
Manufacturer: Leonelli · Material: Plastic, Aluminum · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
Number of cables: 2 pcs · Cable cross-section [mm²]: 1.5 mm² · Cable bifurcation to motor: 150 mm
Details
Manufacturer | Leonelli, swiing® revival parts |
Tension | 6 V |
Color | white |
Bulb holder | BA9s, E10, P26s |
Ø base | 9 mm, 9.5 mm, 26 mm |
Total length | 23 mm, 24 mm, 44 mm |
Performance | 3 W, 4 W, 6 W, 15 W, 20 W |
Test mark | none |
Ø Lamp head | 9 mm, 11 mm, 25 mm |
LED | No |
Suitable for the following models
Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
12V bulb set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 12 V · Performance: 3 W · Performance: 5 W · Performance: 15 W · Performance: 20 W · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
EUR 52.30
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Color: white · Tension: 12 V · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Test mark: none · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
EUR 73.00
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.10
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread)
EUR 2.45
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Bulb holder: BA9s · Color: black · Color: red · Test mark: none · Depth: 43 mm · Width: 130 mm · Brake light: No · Battery operated: No · Height: 58 mm · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 23.00