Stainless steel reinforcement plate for E50 input engines of Puch Maxi mopeds/mopeds.
The chrome steel plate can be used for 2- and 3-jaw clutches.
Bending of the clutch cams is no longer possible after mounting this 1.5 mm thick plate.
The M5 countersunk screws included with the clutch reinforcement plate have a strength of 10.9.
Ø inside: 40 mm
Ø outside: 90.5 mm
Thickness: 1.5 mm
Strength: 10.9
Material: Chrome steel A2, stainless (Nirosta)
Attention: For some clutches, the bolts may have to be shortened down to the circlip so that the clutch with installed plate does not touch the clutch basket.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Area of application | Road use |
| Material | Chrome steel (known as Nirosta®) |
| Ø inside | 40 mm |
| Ø outside | 90.5 mm |
| Height | 1.5 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.60
Axial needle roller bearing 6.4/17/2 clutch original | Puch E50
Bearing type: Needle roller and cage assembly · Bearing cage: Sheet steel cage · Dimension needle bearing: 6.4/17 x 2 · Ø inside: 6.4 mm · Ø outside: 17 mm · Manufacturer: Puch · Width: 2 mm · Area of application: Original · Area of application: Standard · Puch OEM number: 900.6840
EUR 36.10
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Manufacturer: swiing · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.60
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.60
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Area of application: Standard · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
EUR 46.70
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.60
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 42.10
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 12.00
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.70
Collection only possible with online purchase and appointment.
