Inox
Hot 
Polished stainless steel cable duct for your Piaggio Ciao moped / moped.
The cable tunnel with moustache was fitted ex works on the PX model from 1992 and the C24 from 1999, but also fits earlier P and SC spoke wheel models without any problems.
The additionally attached clamps ensure smooth cable routing and prevent the cable sleeves from getting jammed between the steering stop and fork.
The fit is excellent and the workmanship is of a very high quality. All edges and corners are rounded so that your cables are not damaged.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (known as Nirosta®) |
| Surface | polished |
| Width | 53 mm, 80 mm |
| Color | Chrome |
| Number of fixing points | 2 pcs |
| Ø mounting hole | 4 mm |
| Total length | 305 mm, 285 mm |
| Piaggio OEM number | 813377 |
| Alternative version of the Piaggio OEM number | 8133775, 148419 |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut · Reserve level: 70 mm
EUR 12.00
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Number of components: 6 pcs · Material: Steel · Ø outside: 11 mm · Surface: galvanized (blue) · Drive: External hexagon · Total length: 25 mm · Screw head: Hexagon · Area of application: Standard · Width across flats SW: 11 mm · Thread type: M7x1 (standard thread) · Thread length: 19.5 mm
EUR 4.70
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Color: silver · Ø outside: 41.4 mm · Ø outside: 42 mm · Surface: galvanized (blue) · Ø mounting frame: 30.05 mm · Height: 10.5 mm · Height: 17 mm · Ø inside: 27 mm · Thread type: FG25.4 (1" 24G) · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 22.80
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Color: Chrome · Surface: polished · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Mounting type: Nuts & bolts · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Piaggio OEM number: 576135
EUR 42.10
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 24.00
GPO chain tensioner | Piaggio Ciao
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Color: silver · Number of teeth: 8 pcs · Surface: galvanized (blue) · Total length: 64 mm · Ø outside sprocket: 33 mm · Width: 45 mm · Thread type: M8x1.25 (standard thread) · Number of fixing points: 1 pcs
EUR 11.40
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Ø Cable bushing: 2.1 mm · Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Total length: 21.5 mm · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø shaft: 10.5 mm · Thread type: M7x1 (standard thread) · Thread length: 11 mm · Alternative version of the Piaggio OEM number: 154533
EUR 7.00
Collection only possible with online purchase and appointment.
