Complete screw set for the frame of your Piaggio Ciao PX or C24 moped / moped.
The PX is the model with round seat post and rear light on the luggage carrier. The C24 can be recognized by the sprung, square seat post and the rear light on the luggage carrier.
The screw set consists of galvanized steel screws.
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:
- Headlight
- Fork swing arms
- Front and rear mudguards
- Cable duct under tank
- Engine mounting
- Zünd coil
- Splash guard under carburettor
- Pump holder under side guard
- Footboard holder and footboard
- Saddle and suspension
- Equipmentand struts and swing arm
- Pannier clamp and luggage hooks
- Return light on luggage
- Exhaust
- Chain tensioner
- Rear wheel hub and gearbox
- Transmission Gearbox
- Number plate or holder
Note: As the bolt set is designed for two different model series, individual bolts are not required and will remain unused.
Parts such as spacers and rubber buffers for the mudguard can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Surface | galvanized (blue) |
| Material | Steel |
Suitable for the following models
| Piaggio | Ciao - PX, C24 |
Accessories & related products
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M5x0.8 (standard thread) · Drive: Cross recess · Screw head: Panhead · Number of components: 8 pcs
EUR 5.95
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm
EUR 2.45
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Color: black · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 36.50
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Bulb holder: BA9s · Material: Plastic · Color: black · Color: red · Mounting type: Nuts & bolts · Test mark: none · Battery operated: No · Height: 58 mm · Width: 130 mm · Brake light: No · Reflectors: Yes · Number of fixing points: 2 pcs · Depth: 43 mm
EUR 23.00
GPO control bearing set | Piaggio Ciao
Material: Steel · Ø outside: 41.4 mm · Ø outside: 42 mm · Manufacturer: GPO · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Ø mounting frame: 30.05 mm · Ø inside: 27 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Height: 10.5 mm · Height: 17 mm
EUR 23.00
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 24.30
Domino throttle grip (74mm, 3.6°/mm)
Manufacturer: Domino · Material: Plastic · Material: Rubber · Material: Steel · Surface: raw · Housing material: Plastic · Color: black · Ø inside: 22 mm · Number of components: 5 pcs · Total length: 160 mm · Gas route: 74 mm · Degree of movement: 3.6° / mm
EUR 48.60
Collection only possible with online purchase and appointment.
