Spacer washer 16.6x31.2x1.0 mm for the left roller bearing on your moped / moped with Sachs engine and 15 mm pinion shaft (502, 50/2, 50/3, 50/4, 503) and for the right roller bearing on 50/3 & 50/4 engines.
Top quality, hardened and ground.
Ø inner: 16.6 mm
Ø outer: 31.2 mm
Thickness: 1.0 mm
Other accessories such as the bearing rollers and spacers for the pinion shaft can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: A1570
Details
| Ø inside | 16.6 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Thickness | 1 mm |
| Ø outside | 31.2 mm |
| Pony OEM number | A1570 |
| Sachs OEM no. | 0244 078 000 |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
Accessories & related products
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Area of application: Standard · Surface: coated · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Width: 3.5 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 9.15
Shaft seal FPM 14.96/31.5/3.5 Pinion shaft | Sachs 50/2, 503 (A1134)
Place of use: Pinion shaft · Temperature resistance (min.): -30 - 200 °C · Ø inside: 14.96 mm · Ø outside: 31.4 mm · Width: 3.5 mm · Manufacturer: Sachs · Material: FPM - Fluororubber · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 200 · Sachs OEM no.: 0230 011 100
EUR 15.70
swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 13.5 mm · Ø outside: 27.8 mm · Thickness: 1 mm · Pony OEM number: A1547 · Pony OEM number: A1548 · Sachs OEM no.: 0244 039 000 · Sachs OEM no.: 3510 004 004
EUR 9.65
swiing® ingenious ball bearing pinion shaft 15.5/31.5/8 | Sachs 502 AML, 50/2 ML, 50/3, 50/4
Bearing type: Deep groove ball bearing · Ø inside: 15.5 mm · Ø outside: 31.5 mm · Width: 8 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Bearing cage: Sheet steel cage · Material: Steel
EUR 34.00
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Color: black · Surface: raw · Number of components: 1 pcs · Area of application: Standard · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Stock number: BO15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 40 mm · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.40
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Area of application: Standard · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm
EUR 48.60
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Nominal diameter inside: 13 mm · Ø outside: 18 mm · Ø outside: 21 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
EUR 20.60
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Area of application: High End · Area of application: Standard · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 60.80
swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 13.5 mm · Ø outside: 27.8 mm · Thickness: 1 mm · Pony OEM number: A1547 · Pony OEM number: A1548 · Sachs OEM no.: 0244 039 000 · Sachs OEM no.: 3510 004 004
EUR 9.65
Collection only possible with online purchase and appointment.
